User`s guide

Setting the Configuration
________________________________________________________________
24 TCP/IP AXEL Platine Terminal
Example 1
This example assumes operational connection of the following views to the
following hosts:
view 1: SCO UNIX 3.2v4 host,
view 2: IBM AIX host,
The following procedure is used to establish the sessions:
<Alt><F1> invoking view 1
<Ctrl><Alt><Esc> entering Terminal Set-Up
<F10> selecting SCO 4.0 UNIX pre-defined set-up
<F12> saving new setting
<Alt><F2> invoking view 2
<Ctrl><Alt><Esc> entering Terminal Set-Up
<F10> selecting ANSI RS/6000 pre-defined set-up
<F12> saving new setting
Example 2
This example assumes the following Platine terminal settings and that view 1 is
operational:
view 1: IBM AIX host,
view 2: IBM AIX host,
view 3: IBM AIX host,
view 4: IBM AIX host.
The sessions can be set up as follows:
<Alt><F1> invoking view 1
<Ctrl><Alt><Esc> entering Terminal Set-Up
<F10> selecting ANSI RS/6000 pre-defined set-up
<F12> saving setting and PROPAGATION to other sessions