User`s guide

Setting the Configuration
________________________________________________________________
22 TCP/IP AXEL Platine Terminal
2.6 - SETTING EMULATIONS
Each AX3000 Ethernet model provides up to 8 independent virtual terminals.
Multi-connection lets any Platine terminal user run up to 8 simultaneous
working sessions (on different hosts, if required). Virtual terminals have
independent set-up parameters (emulation, function keys, video attributes, etc).
For example, an RS/6000 ANSI emulation can be used on one view while a
VT220 emulation is being used on another.
The set-up of parameters for each virtual terminal is done with the Platine
terminal Set-Up. Enter the set-up screen with the <Ctrl><Alt><Esc> key
sequence.
Note: Terminal Set-Up should be entered only during an active session (active
login or prompt).
Set-up operations are described in the
User's Guide. A session involves the
following steps:

(enter terminal set-up)

(select pre-defined set-up )

then

(select a UNIX pre-defined set-up)

then

(optional duplication and saving of selected parameters)
The pre-defined set-up (<F10> option) automatically initiates main terminal
parameters for the corresponding session. If necessary, each individual
terminal parameter (number of lines, columns, function keys, etc) can be
modified individually.