User`s guide

Downloading Firmware
________________________________________________________________
TCP/IP AXEL Platine Terminal
117
-
xxx
is the error number,
-
label
is the error message. This label is sent by the tftp host and is
generated by UNIX running on the tftp host.
Possible errors:
1: File not found
2: Access violation
3: Disk full or allocation exceeded
4: Illegal TFTP operation
5: Unknown Transaction Identifier
6: File already exists
7: Illegal TFTP operation
0: User-defined error
For more information, refer to UNIX manuals.
Tftp AX3000 Errors:
tftp errno: xxx
-
xxx
is the error number.
Possible errors:
10: Ethernet board not responding.
11: no response to the tftp broadcast request (the tftp host is unreachable
or not correctly set-up).
12: Network error.
13: the firmware file does not correspond to AX3000 firmware or is not
compatible with the AX3000 model.
14: the firmware file size is less than 256 bytes. This indicates that the file
is not an AX3000 firmware file.
15: checksum error on the firmware file.