User`s guide

ManualsBrandsAxel ManualsComputer equipmentAX3000 Platine Terminal Ethernet TCP/IP 65E

111

112

113

114

115

116

117

118

119

120

Downloading Firmware

________________________________________________________________

TCP/IP AXEL Platine Terminal

111

11.2.2 - Downloading Through Set-Up

Enter TCP/IP Set-Up (

) and select the '

Flash'

menu.

Within this menu, select the '

Download (tftp)

' item.

The following information must be entered in the four fields:

Filename

: path and name of the firmware file,

AX3000 IP

: this is an IP address only used during the downloading

operation. It can differ from the current IP address,

tftp Host IP

: name or IP address of the tftp host (if the name is used,

this host name must be listed in Set-Up),

tftp Router IP

(optional): name or IP address of a router via which

the tftp host can be reached (If the name is used, this router name must

be listed in the target AX3000 Set-Up).

When <CR> is pressed within the last field, the download operation is run and

the following message is displayed on the AX3000 monitor:

AX TFTP V1.3

Flash Key 3

If the download can be performed (AX3000 and tftp host reachable, firmware

file found, etc.), the current firmware is erased and the following message is

displayed on the AX3000 monitor:

Erasing code ...

Then, the selected firmware file is downloaded (each dot represents 256 bytes):

Loading code

................................................................

.........................................

code loaded

The AX3000 is automatically reset and the new firmware is enabled.