User`s guide

Remote Administration
________________________________________________________________
102 TCP/IP AXEL Platine Terminal
multi_s3=112 (number in range 2 to 123)
multi_s4=112 (number in range 2 to 123)
multi_s5=112 (number in range 2 to 123)
multi_s6=112 (number in range 2 to 123)
multi_s7=112 (number in range 2 to 123)
multi_s8=112 (number in range 2 to 123)
Terminal Parameters
term_screen=color (black-white | color
grey-levels | paper-white)
term_screen_enhanced=no (no | underline | doublesize)
term_keyboard=english (french | german | italian
spanish | belgian | english
american | portuguese | dutch
swiss-german | swiss-french |
turk-q | turk-f | iceland)
term_screensaver=yes (no | yes | yes-kbd-only)
term_screensaver_delay=2 (number lower than 31)
term_numlock=on (on | off)
term_capslock=on (on | off)
term_beep=long (no | long | short)
term_keydelay=mediun (low | medium | high)
term_keyspeed=low (low | medium | high)
term_language=english (french | english)
term_defaultport=aux1 (none | aux1 | aux2 | parallel)
Note: When a configuration file is obtained from an AX3000, if
term_screensaver
is set to
no
,
term_screensaver_delay
is commented
out.
'Session' Parameters
In the following section of the file, for ease of reading the session number (1 to
8) has been represented by the '%' character. In a real configuration file, the
parameters for each session would, of course, be listed.
s%_associate_host=vangogh (character string, 15 char max.)
s%_associate_term=ansi (character string, 15 char max.)
s%_associate_label=view 1 (character string, 15 char max.)