Installation guide

Installation
Installation Guide - Models 65B 5
If your keyboard is fitted with a DIN connector, connect it using a DIN-to-Mini-
DIN adaptor.
Note: a serial mouse can also be connected to the AUX2 port.
To comply with EMC regulations, the VGA signal cable must be shielded.
Note: when the terminal is installed in a cabinet or rack, it is essential to
maintain air circulation around the VGA/SVGA monitor.
2.2.2 - Ethernet Connection
Plug the RJ45 connector on the end of the 10BaseT cable into the socket
labeled LAN on the back of the AX3000 (see chapter 4.1 for technical
specifications and pin assignments).
ETHERNET
ETHERNET CONNECTION INDICATOR LIGHT: this indicator is a green
LED, located on the upper-right corner of the LAN RJ45 connector. It
lights to indicate a satisfactory connection to the Ethernet circuit (server
or hub).