Installation guide

Installation
4 Installation Guide - Models 65B
2.2 - INSTALLATION
For safety reasons and to prevent component damage, do not apply power to
the AX3000 before connecting or disconnecting any cable. Do not plug in the
AX3000 power cord until all other connectors have been plugged in.
Make sure the AX3000 and monitor power switches are in the OFF (0) position
before connecting cables to the back panel.
2.2.1 - Monitor and keyboard
Plug in the VGA monitor cable, the AT-compatible keyboard cable and the
optional mouse cable to the dedicated connectors on the terminal back panel: