Quick Start Manual




  

 
!"
A ctio n C o mmand
Change Activato r ID <new number>W
Enable respo nse to multiple Activato r IDs 33c
Return to single Activato r ID 19c
!
Action
Command
Enable alarm data output
26c
Disable alarm data output
12c

Command Receiver code Responses
00 Command completed successfully
05 Value entered is not allowed
06 Invalid or unknown command
TTL Output 1 TTL Output 2 Action
<number>D
<number>E
in seconds. Valid numbers are
000 - 255. Default: 005 seconds
10c
11c
Set output to go from Low to
High; i.e. trigger a signal
16c
17c
Do not activate TTL output for
a valid Tag read. Default.
30c
31c
Activate TTL output for any
valid Tag read.
13c
14c
Do not activate TTL output
when alarm code received from
a Panic or Tamper Tag. Default.
27c
28c
Activate TTL output when alarm
code received from Panic or
Tamper Tag.





