Polisher Operating Instructions (ENG) MODELS: 1.012-063.0 Read instructions before operating the machine.
MACHINE DATA LOG 2 86324160 AXCESS 03/23/09
TABLE OF CONTENTS Machine Data Log/Overview........................... 2 Table of Contents............................................ 3 PARTS LIST Accessories & Spare Parts..............................5-1 Vacuum ...........................................................5-2 Polisher Head..................................................5-4 HOW TO USE THIS MANUAL How to use this Manual................................... 1-1 SAFETY Important Safety Instructions ..........................
HOW TO USE THIS MANUAL This manual contains the following sections: - HOW TO USE THIS MANUAL SAFETY OPERATIONS MAINTENANCE PARTS LIST The HOW TO USE THIS MANUAL section will tell you how to find important information for ordering correct repair parts. Parts may be ordered from authorized Windsor dealers. When placing an order for parts, the machine model and machine serial number are important. Refer to the MACHINE DATA log which is filled out during the installation of your machine.
SAFETY IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. To reduce the risk of fire, electric shock, or injury: Use only indoors. Do not use outdoors or expose to rain. Use only as described in this manual. Use only manufacturer’s recommended components and attachments.
SAFTEY The following symbols are used throughout this guide as indicated in their descriptions: HAZARD INTENSITY LEVEL There are three levels of hazard intensity identified by signal words - WARNING and CAUTION and FOR SAFETY. The level of hazard intensity is determined by the following definitions: ! WARNING WARNING - Hazards or unsafe practices, which COULD result in severe personal injury or death.
SAFETY GROUNDING INSTRUCTIONS This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a code having an equipment–grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
OPERATIONS TECHNICAL SPECIFICATIONS VACUUM PORTION: (Carry unit) ITEM Vacuum Motor Vacuum Motor Rated Power Vacuum Motor Maximum Power Suction Air Flow Filter Bag Capacity Weight Without power head With power head Dimensions - Height Housing Cable DIMENSION/CAPACITY High Performance, single stage 1000 Watts 1300 Watts 225 Mbar (2300 mm WS) 106 cfm (50 l/s) 3.5 liters, 3 layer, enclosed, top-loading 9.9 (4.5 kg) 18.5 lbs (8.4 kg) 48 in (123 cm) Injection molded, high impact ABS and PP plastic 31 ft (9.
OPERATIONS COMPONENTS/CONTROLS 1. Handle 2. On/Off Switch 3. Handle Tube 4. Power Supply Cable 5. Dust Bag Housing 6. Filter Cover 7. Cable Hook 8. Hose 9. Hose Handle 10. Carrying Handle 11. Exhaust Filter 12. Filter Retaining Rings 13. Release Button 14. Swivel Neck 15. UHS floor polisher 16. Foot Pedal 17. LED-operation light (green) 18. LED-overload light (red) 19. Bumper 20. Suction duct access cover 21. Release button 22. Castor 23. Seal 24. Support castor 25. Floor Pad 26. Pad retainer 27.
OPERATIONS ASSEMBLY ! CAUTION Please read all instructions before using this machine. 1. To assemble, carefully attach the polisher nozzle to the vacuum cleaner through the fitting at the bottom of the vacuum until it locks. 2. Push the black end of the hose into the connection on the filter cover. 3. Insert the hose handle into the suction opening on the side and press the hose into its place on the side of the machine. 4.
OPERATIONS When using the hose and attachments, keep the machine in the upright positions. ! CAUTION The hose handle can be removed from the side of the vacuum and can be used with or without attachments. Maintain a grasp on the machine when using the hose as it can tip if the hose is pulled too far. The machine can also be used without a power head or other floor tool. You can easily carry the machine by using the carrying handle.
MAINTENANCE ! CAUTION Use only genuine replacement floor pads to ensure performance, longevity and safety. FILTERS When the orange bag full indicator is showing, airflow is reduced. This could be because the filter bag is full, the filters clogged, or there may be a blockage (see Removing blockages). CHANGING THE FILTER BAG To remove the filter bag , open the latch on the side of the bag housing. Close the filter bag with the sealing cap and lift it out.
MAINTENANCE LED-DISPLAY The green LED light indicates that the floor polisher is operational. The red LED light comes on if the machine has shut down for safety reasons e.g. overload or clogging (refer to “Removing Blockages). Please check the Floor Pad regularly for sharp and abrasive materials e.g. grains of sand. If necessary please change the pad, otherwise floor damage can occur.
MAINTENANCE REMOVING BLOCKAGES ! CAUTION Never clean the hose with a stick or pointed object. If there is a blockage, check the pad area (under side) first. To do this first remove the floor pad, see “Changing the Floor Pad”. Also check the suction duct . Push the release button and remove the suction duct access cover. Check the swivel neck of the Polisher. Ensure there is no blockage between the suction duct and the inlet of the swivel neck.
ACCESSORIES & SPARE PARTS SPARE PARTS Ref Part No. Prv. No. 1A 86320520 3230WI30 1B 86312140 3230WI00 1C 86320530 3286WI40 2 3 86309330 86284790 7029WI 4 86284770 7012 5 86323990 - Description DIAMOND PAD GREEN FINE ABRASION BLUE FLOOR PAD DIAMOND PADS RED/YELLOW COMBO PACK FILTER, EXHAUST FILTER BAG FILTER, MOTOR PROTECTION AXCESS POLISHER POWER HEAD ACCESSORIES Ref 1 2 3 4 5 6 Part No. 86138400 86146290 86322440 86322450 86324000 86324010 Prv. No.
VACUUM 5-2 86324160 AXCESS 03/23/09
VACUUM POS.
POLISHER HEAD 2 1 4 8 9 5 11 12 10 3 7 6 13 21 5 14 16 17 18 19 20 23 15 22 24 27 25 28 26 20 29 34 20 31 30 32 20 35 33 36 5-4 86324160 AXCESS 03/23/09
POLISHER HEAD POS. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 PRODUCT CODE 86314610 86314360 86314370 86314380 86314390 86324850 86144990 86324860 86324870 86324880 86324890 86144820 86138140 86314450 86314460 86314470 86314480 86138390 86314490 86144780 86314500 86314510 86321410 86141710 86314520 86314530 86147030 86314540 86314550 86314560 86314570 86314580 86312140 86320520 86320530 86314590 86320540 86321420 PRV NO.
NOTES: 5-6 86324160 AXCESS 03/23/09
