User's Manual Part 1

SYSTEM

Unpacking

Axcera certifies that upon leaving our facility all equipment

was undamaged and in proper working order. It is impera-

tive that all packages be inspected immediately when re-

ceived to verify that no damage occurred in transit to the

site.

· Inspect all packages for exterior damage and

make note of any dents, broken seals, or

other indications of improper handling.

· Carefully open each package and inspect the

contents for damage. Verify that all materi-

als are enclosed as listed on the packing slip.

Report any shortages to Axcera.

· In the event any in transit damage is discov-

ered report it to the carrier. Axcera is not

responsible for damage done by the carrier.

· If the equipment is not going to be installed

immediately, return all items to their original

packaging for safe storage.

· Save all packing material for future use. If

equipment is ever removed from the site, the

original packaging will ensure the safe trans-

port of it. Keep at least one copy of all docu-

mentation including this manual at the site in

a safe place.

Installation

All 5720 series products are designed for simple installation

with comprehensive instructions. Expensive test equipment

is not required to keep a system operational, installation,

and set up. Prior to installing the product review the check-

list that follows.