Quick Start Guide

CHARGING
• Connect the Wireless Charger using the
included USB-C power cable (power supply
not provided)
• Place your Qi® enabled smartphone on the
center of Wireless Pad #1. Your
smartphone will automatically begin to
charge.
• Place your Qi® enabled wireless earbud
case on Wireless Pad #2. Your earbud case
will automatically begin to charge.
iTOUCH
3-IN-ONE CHARGER
®
iTOUCH
®
3-IN-ONE
OPERATING INSTRUCTIONS
PREPARING TO CHARGE
Supports smartphones with a
protective case up to 4mm thick. If your
protective case is metallic or has
magnetic plates, you must remove
the case before placing your phone on
the charging pad.
Place the iTouch Charger inside the
Pass-through slot  and plug it into
the USB-A output  .
QU I CK S T A R T G U IDE
FAST CHARGING
Enable Fast Charging (up to 10W) for your
device by using a USB charger with Quick
Charge 3.0 Technology (5V/3A, 9V/2A).
TROUBLESHOOTING
No power: First make sure you plugged
the USB cord into the correct ports. Then
try using a different cable.
Device isn't charging: Make sure your
device supports wireless charging and is in
the center of Charging Pad.
Watch isn’t charging: Make sure the
watch charger cable is connected to the
USB-A Output (1) and that the charger pins
align with the connectors on the watch.
1. USB-A Output
2. USB-C Input (power supply not provided)
3. Qi® Wireless Charging Pad #1
4. Qi® Wireless Charging Pad #2
5. iTouch Charger Pass-through slot