User`s manual

Digital Display Manual
16
SECTION 4: Trouble Shooting Your Digital Display
Table 3 presents a list of possible problems and causes that you could
experience with your Digital Display.
Problem Possible Cause
1. No display lights Power not connected properly
2. All zeros on display, or Data phone line between MCU and
the words “no signal” display not connected properly
3. Temperature of –100 Data transfer between Remote Weather
Module and Master Control Unit
3. Highs and lows incorrect Power interruption during the day
4. Change rates incorrect Power interruption during the day
5. Time and/or date incorrect Call WeatherBug Technical Support
Table 3: Troubleshooting Guide
If you have any questions regarding your Digital Display, you may call the
WeatherBug Weather Station Technical Support line at [phone] or
reach help via email at [e-mail].