AWOL unis AWOL. Ambient Light Rejection Daylight Screen instruction Manual Thanks for choosing the AWOL Vision 100 Inch controllable Fresnel fixed frame Lambent Light Rejection daylight screen AL R-D100. Please read this manual carefully before installation and use.
KNOWING YOUR SCREEN AWOL ALR controllable Fresnel daylight screen Is equipped with 8 Layers optical structure to offer 4Ka8K Ultra HD resolution, 3D capable, 1.1dB peak gain, 85% rejection ratio, neutral color temperature, and enhanced picture contrast in a theater, grade Image.
BD) crc ver 3 FE) { Wall Anchors im Comer -, Wall Drilling, 3 rs Laval ,. D protectors” © Templates with Screws Phillips-Head p. MAE Gloves [05m te @Support Rod *1 @ ggg 02.
ASSEMBLING YOUR SCREEN Bai 1. Connect the horizontal frames and fasten the M57 screws. 2, Insert the four some connectors into tha horizontal nicer frames, and attach the comers with ME*7 screws 83 shown below. Comer Connector Horizontal Frames.
3. Install the support rod as shown below. Support fad: Vertical to the horizontal frames Assemble the Screen 1. Put on gloves and place a clean cloth (or use the packaging material for the worsen) on a fiat, clean and level surface. ONS 2. Unroll the screen, place i face down an the sloth, then insert the Fiberglass strips Info the screen sides. Caution: Handle with Cara.
Garner alignment mark Censor back side Fiberglass Tip Loren Screen lower edge ark for direction 4. Fix tha scrawny onto the frame with all the parings in order as Insinuated below {soldiers, short sides, then long sides). Hin A serotonin use the sateen . pings to the sinner gram tn rotation 8. Hold the screen upright and ensure that i is taut and flat, Adjust the springs until no creases observed. 08.
Bat eg 1. Place the outer frames against the inner frames, align the four corners and attach with the included M4*8 screws. 2. Attach the plastic comer protectors onto the four corners. 10-A S0-R40-8: Hon) Niter Drama 10-0 Orlons Outer Frame 10 Samar Protector Net Frame Outer Frame 1147 ALA Sonora for UST Fragmentary LAT LE 1. Estimate the wail mount area for the screen.
4. Drift holes respectively and Install the four wall brackets using 5. Make sure the screen is contently assembled, then wrap ths screen front with the cloth to prevent it farm being damaged or the wall anchors with Screws. orchestrated. Hots: Make sure the Tracksuits ars level with the elev tiler. 2 Wall Selling Templates 0 Wall Anchors with Sores per Wad Brackets £3 + Coward Wall Racks ALR Saran tor UST Professor 414 15.
&. Noreen height adjustment You can fine Tune the Installation alight of the screen without diving new he's based an the screw Fees in the upper wail bracket and the lower wal bracket spring tangs. (Adjustable sight tangs: 0-2.0 inches) 15 1 ALR Borden for UST Proletariat €. Mount the strewn mo the wal ss shown below, 1} insert the lower side of the screen Into the sower wall bracket, then push upwards to compress the lower wal: bracket satin.
Maintenance& Precautionary Notes Maintenance & Precautionary Notes Dust, dirt ard scratches on the projection screen surfing wil affect tha quality and performance of the projection mage, For optimal rests we advise ta pay distention to ha following Instructions. 1. Please een the dust on the serene surface with a soft brush or microfiber cloth {rough towel or cloth mey damage the scrap's resistance. 2. Gentry wine the screen with 8 moistened microfiber cloth with nl sep diverted In water.
