Installation Guide

INSTALLATION

• Reconnect the power.

Installing the Oil Container

• Locate 2 Brackets at the hood bottom, one on each

side, near the back of the range hood.

• Align the oil container with the hood body and slide

it, from front to back, into the Brackets.

Installing the Baffle Filters

• Peel off the protective film from the baffle filters if

there's any.

• Align the baffle filter's bottom pins to the holes on

the hood. (Step 1)

• Pull and hold the latch. The top pins of the baffle

filter will retrack into the filter while the latch is

pulled. (Step 2)

• Keep pulling and holding the latch and push the top

end of the baffle filter upwards till it reaches the

hood.

• Release the latch to lock the baffle filter in place.

• Repeat these steps to install the rest of the baffle

filters.

Note

• Make sure all baffle filters are securely locked and

won't come off.

• These Baffle Filters collect the oil/grease while

you cook. There's no need to install other types of

filters.

• Clean the Baffle Filters every 2 to 3 months

regularly. Follow the cleaning guide in Page 10.

Completing the Installation

Turn blower ON in the control panel. Check all lights and

fan operations.

Step 1: Align

Step 2: Slide

Step 1: Align the pins.

Step 2: Pull and hold the latch.

Filter

Top

Filter

Bottom