User Manual

4
4. INSTALLATION INSTRUCTIONS
A. Installing on the concrete wall:
4.1.1 Remove the plastic parts, unscrew the
fixing screws to remove the mounting plate
from the back of the main body.
PLASTIC PARTS
1
2
MOUNTING PLATE
2
1
4.1.2 Determine the mounting location with
the mounting plate. Drill holes and insert the
Zinc-Plated Steel Hex-Nut-Head Sleeve
Anchor (not included).
4.1.3 Tighten the nuts to secure the
mounting plate to the wall (use the washers
and nuts as the Fig shows).
4.1.4 Hang the main body onto the upper
end of the mounting plate, and then tighten
the bottom fixing screws back
to the
mounting plate.
B. Installing on the wooden wall: (Note: make sure the screws are secured in the wood,
attach an extra wood frame to the wall if needed.)
4.2.1 Refer to step 4.1.1 and determine the
mounting location, then securely mount the
mounting plate to the wooden wall with tapping
screws.
4.2.2 Hang the main body onto the upper end
of the mounting plate, and then tie the bottom
fixing screws back to the mounting plate.