User Manual

4
4. INSTALLATION INSTRUCTIONS
A. Installing on the concrete wall:
4.1.1 Unscrew the fixing screws to remove
the mounting plate from the back of the main
body.
4.1.2 Determine the mounting location with
the mounting plate. Secure the bolts in
place. (Fill cement into the bolt holes if
needed)
4.1.3 Tighten the nuts to secure the
mounting plate to the wall after cement
setting (use the washers and nuts as the Fig
shows).
4.1.4 Hang the main body onto the upper
end of the mounting plate, and then tighten
the bottom fixing screws back
to the
mounting plate.
B. Installing on the wooden wall: (Note: make sure the screws are secured in the wood,
attach an extra wood frame to the wall if needed.)
4.2.1 Refer to step 4.1.1 and determine the
mounting location, then securely mount the
mounting plate to the wooden wall with tapping
screws.
4.2.2 Hang the main body onto the upper end
of
the mounting plate, and then tie the bottom
fixing screws back to the mounting plate.