Specifications

Actassi Enclosures
OPB
19" Wall Open Box with swing rack
Open for easy installation and maintenance
Introduction and selection guides
■ Wall-mounting enclosure made from folded and welded sheet steel, powder paint,
leather-grain nish, RAL 7035 light grey epoxy-polyester.
■ Enclosure made up of a body, 2 hinged and removable side panels, a 19" swing
rack and a Securit
®
glass transparent door with key nº 333.
■ Ingress Protection : IP20
– Object size protected against > 12,5mm
– No liquid protected
■ Impact Protection : IK08
– Impact energy = 5 joules
■ Available enclosures :
– 5 heights: 6, 9, 12, 15, 18 U.
– 3 depths: 400, 500 and 600 mm.
■ Swing rack: Acceptable load of 25 kg. (Include 25% of margin load rating
according to the IEC 62208)
■ Certications : In compliance with the directive RoHs, with the 19" standard
IEC60297-3-100 and EIA-310-E
Installed enclosures
Number of U
Dimensions (mm)
Enclosure
reference
Blanking
plate
Cable-gland plate
with brush gasket
Blanking plate
with 2 fans
Height Width Depth
6 380 600 400 NSYOPB6U4P NSYOPB6UTPN
NSYECP300 NSYECVT300
6 380 600 500 NSYOPB6U5P NSYOPB6UTPN
9 515 600 400 NSYOPB9U4P NSYOPB9UTPN
9 515 600 500 NSYOPB9U5P NSYOPB9UTPN
12 650 600 500 NSYOPB12U5P NSYOPB12UTPN
12 650 600 600 NSYOPB12U6P NSYOPB12UTPN
15 780 600 500 NSYOPB15U5P NSYOPB15UTPN
15 780 600 600 NSYOPB15U6P NSYOPB15UTPN
18 915 600 500 NSYOPB18U5P NSYOPB18UTPN
Total accessibility with
the swing rack and the
swingable and removable
side panels and door.
98 | Actassi 04.2012 | Network Connectivity