Specifications

Actassi Fibre LAN range is adapted to the familiar ways of installing optic connectors
and pigtails (SC, LC, ST). The range is available under 2 different structures: Tight buff-
ered and Loose tube to be used for direct connector termination and for splicing respec-
tively. Both structures are suitable for indoor and specic outdoor installations.
Actassi fibre optic cables
Innovative design
Innovative design of dual
loose tube structure to
help simplify the installation.
100% glass yarns
Reinforcing the tensile
strength of the cable. Acting
as rodent retardant.
Robust sheath
Tensile strength
Reinforces the tensile
strength of the cable.
Robustness
High maximum pulling force
and crush resistance of the
cable during installation.
UV resistance
Resistance to UV
degregation.
Colours
Distinct colours to identify
strategic cables and prevent
mistakenly cutting the cable.
Water swellable
elements
Provide a protective barrier
against longitudinally water
ingression while guarantee-
ing cable perfomance.
Loose tube Tight buffered
Colour code
Fibre n°1 to n°12 according to the following colours.
Fibre n°13 to n°24: idem + transparent
1 Blue
2 Orange
3 Green
4 Brown
5 Grey
6 White
7 Red
8 Black
9 Yellow
10 Violet
11 Rose
12 Aqua
Gel
Provides a protective barrier
against longitudinall water
ingression while guarantee-
ing cable perfomance.
Coating
250 µm coating
900 µm coating
1
2
5
6
7
1
1
5
Packaging
Packaging
adapted to our
customers requests (conve-
nient small sized drums or
cut to length).
Compact for
improved bending
radius
The compact design of the
cables gives several benefits:
• Reduced bending radii:
10 x diameter for Tight
buffered and 60 mm for
Loose tube cables
• Reduced diameter and
increased installation space
2
2
3
3
3
4
4
7
6
8
8
8
64 | Actassi 04.2012 | Network Connectivity