Specifications

Network Connectivity | 04.2012 Actassi | 49
The fire properties
are documented by
standardized methods
according to IEC
60332-1,
60332-3C,
60754-1 and
60754-2.
Less cutting with Actassi CL-MX
Use the cable stripper
tool and cut the outer
sheath.
Cut the one single
foil metallic crossfiller
and remove it with
a simple grip.
Your CL-MX is ready
to connect.
Better link performance
With Actassi CL-MX the installations are easy
and safe. According to the international stand-
ards for shielded LAN cables, the use of CL-MX
cables will require less installation operations:
- No separation distance to power cabling*
- No ANEXT field testing
*
EN 50174-2 to be referred
Improved safety in case of re
Actassi CL-MX is available in two versions, the
flame retardant LSZH and the fire retardant
LSFRZH. Both are halogen-free. In case of fire,
the result of using CL-MX is the reduction of the
emissions of opaque smoke and acid gases.
Thus, it helps reducing damages to equipment
and allows people to escape from the building
more easily.
Why traditional F/FTP cables are 3 times slower to install
Prepare your
tools.
Cut the outer
foil.
Separate all
pairs and the
drain wire.
Use the cable
stripper tool
and cut the
outer sheath.
Remove the
foil.
Cut and remo-
ve the
foil of the
first pair.
Cut and remo-
ve the
foil of the
second pair.
Cut and remo-
ve the
foil of the
third pair.
Cut and remo-
ve the
foil of the
fourth pair.
Instead of separate wrapped-in foil pairs (like in
traditional F/FTP or F/UTP cables), the Actassi
CL-MX new crossfiller is wrapped in one single
foil. This means less cutting and improved
quality of the cable preparation. No need to pay
attention to cutting the foils at exactly the same
level, or to the length of the F/UTP plastic cross.
3
Three times faster
installation with
Actassi CL-MX