Specifications

Actassi Enclosures
Plain blanking plate (J1) (K1)
■ Fixing on the internal surface of the base or roof.
■ Can be combined with other types of blanking plates.
■ Treated sheet steel.
■ Delivered with the xings required for installation.
Reference
NSYEC440
Blanking plate with brush gasket (J2) (K2) (L1)
■ Fixing on the internal surface of the base or roof or on a 6 U knock-out panel of the
reduced rear door.
■ Can be combined with other types of blanking plates.
■ Treated sheet steel.
■ Delivered with the xings required for installation.
Blanking plates with or without fans
Ø 120 mm (J3) (J4) (L2) (L3)
■ Fixing on the internal surface of the base or roof or on a 6 U knock-out panel of the
reduced rear door.
■ Equipped with 2 fans, free ow of 170 m
3
/h each, 220 V-50/60 Hz, installed
wired with terminal board. A 3-m power cord is supplied, installed.
■ Can be combined with other types of blanking plates.
■ Treated sheet steel.
■ Delivered with the xings required for installation.
■ Noise level: 34 dB (A).
■ To use fans with UK PDU’s, order UK adaptor Ref : NSYAPUFRUK
Dimensions (mm) Reference
75 x 400 mm NSYECP440
Dimensions (mm) Reference
With 2 fans NSYECVT2V440
VDA/VDS
EA accessories
Roof and base accessories
Installation supports
Number of U Reference
24U NSYBR9F24
42U NSYBR9F42
Additional 19" uprights
■ Assembly on the depthwise supports.
■ Depth adjustable in steps of 25 mm.
■ Kit made up of 2 uprights and the xings required for assembly.
■ 9.5-mm square holes in the front panel.
NSYEC440
NSYECP440
NSYECVT2V440
NSYECVT2V424 /
NSYECVT2V440
Network Connectivity | 04.2012 Actassi | 115