Specifications

Actassi Enclosures
Locking system (P1)
■ Allows the closure of a side panel and the rear panel.
■ Lock with key n° 333 with escutcheon plate.
■ It is installed on the opening latches of the side and rear panels.
■ Delivery of 2 locks per panel.
Reference
NSYSTVDA
VDA/VDS
Accessories
Reference
NSYCUNVDA
Coupling kit (R1)
■ Kit to be used when coupling two racks side by side.
■ Kit made up of 4 anges and the xings required for assembly.
EA accessories
Vertical trim strips with cable entries (H2)
■ For enclosures with a width of 800 mm only.
■ Side cut-outs allowing the entry of cables every 250 mm. Knock-out entries on the
front plate every 250 mm.
■ Assembly on the framework uprights providing aesthetic continuity between the
framework and the 19" uprights positioned at least 100 mm away from the door.
■ RAL 7011 dark grey paint.
■ Cable-protection strips (not supplied) to be ordered separately. See
page XX.
■ Dismounting by 1/4-turn screws.
■ Kit made up of 2 trim strips.
Handling wheels (M3)
■ Batch of 4 swivel castors, 2 of which are equipped with a locking system.
■ Direct xing under the bottom frame of the rack by M12 screws.
■ Height of the castors: 105 mm.
Acceptable load Reference
250 kg/4 castors NSYRUFVDA
Number of U Reference
42U NSYPV42
NSYSTVDA
NSYCUNVDA
NSYPV42
NSYRUFVDA
114 | Actassi 04.2012 | Network Connectivity