Specifications

Actassi Enclosures
SCALE 0.100
SCALE 0.100
SCALE 0.100
SCALE 0.100
250
595
Levelling feet
■ Delivered with the xings required for installation.
■ Require drilling of the enclosure at the knock-out point for direct installation.
■ Batch of 4 parts.
Reference
NSYPNOPB
Wheels
■ Delivered with the xings required for installation.
■ Require drilling of the enclosure at the knock-out point for direct installation.
■ Installation possible on the plinth.
■ Batch of 4 parts.
Reference
NSYRUFOPB
Plinths
■ Material: sheet steel, 15/10 mm thick, powder paint, leather grain nish,
RAL 7011 dark grey epoxy-polyester.
■ Height 100 mm.
■ Delivered with the xings required for installation.
■ Removable surfaces.
■ Knock-out entries on the side and rear surfaces for cable entry.
Dimensions (mm)
Reference
Width Depth
600 400 NSYZUN64OPB
600 500 NSYZUN65OPB
600 600 NSYZUN66OPB
Brush gasket for the cable entries
through the plinth
■ It is xed to the knock-out areas for the cable entries.
■ Delivery as a unit.
Entry width (mm) Reference
75 x 400 NSYJPSVD
Wall-mounting kit for the enclosures
■ Allows wall-mounting of enclosures from 6 U to 29 U, with a depth of 600 mm.
■ Maximum load inside the enclosure: 50 kg.
■ The kit includes 2 brackets.
■ Maximum load inside the rack: 100 kg.
Enclosure depth (mm) Reference
600 NSYCFRS
OPB
Base accessories
NSYPNOPB
NSYRUFOPB
NSYZUN65OPB
NSYJPSVD
NSYCFRS
Network Connectivity | 04.2012 Actassi | 103