Specifications

Actassi Enclosures
OPB
Mounting accessories
Number of U Reference
6 NSYOPB6UTPN
9 NSYOPB9UTPN
12 NSYOPB12UTPN
15 NSYOPB15UTPN
18 NSYOPB18UTPN
21 NSYOPB21UTPN
Rear blanking plate
■ Blanking plate made from sheet steel, powder paint, leather-grain nish,
RAL 7035 light grey epoxy-polyester.
■ Delivered with the xings required for installation.
19" uprights, rear, 2 U
■ Allows to save 2U on the front and to x Power Distribution Unit on the back of the
enclosure
■ Batch made up of 2 partial 2 U 19" uprights delivered with the
xings required for installation.
■ It is xed to the rear of the enclosure.
■ It allows the installation of products in 19" format.
■ Height adjustment with a step of 44.45 mm (1 U).
■ Material: zinc-coated sheet steel.
Additional 19" uprights
■ Batch of two 19" uprights delivered with the xings required for installation.
■ Material: zinc-coated sheet steel, 20/10 mm thick.
■ Maximum load: 3 kg/U; max. 50 kg per enclosure.
■ Unit marking.
Number of U Reference
6 NSYOPB6UF
9 NSYOPB9UF
12 NSYOPB12UF
15 NSYOPB15UF
18 NSYOPB18UF
21 NSYOPB21UF
Number of U Reference
2 NSYSSOPB
Cable support for enclosure, rear
■ Allows to secure and guide the cables on the back of the enclosure
■ Fixed to the rear of the enclosure to support and x the cables.
■ Height adjustable with a step of 44.45 mm (1 U).
■ Material: zinc-coated steel.
■ Delivered with the xings required for installation.
Cable support
NSYSPBOPB
NSYSPBOPB
NSYSSOPB
NSYOPB6UF
NSYOPB6UTPN
Network Connectivity | 04.2012 Actassi | 101