Technical data

8.13.14 ROD (AquadB) 5V with Hall (X5, X1)
Wiring of a 5V incremental encoder (ROD, AquadB) with Hall sensors as a feedback unit
(primary, ð p.62). For the commutation hall sensors are used and for the resolution an
incremental encoder. The thermal control in the motor is connected to X1 and evaluated
there.
If cable lengths of more than 25m are planned, please consult our customer service.
Frequency limit X5: 1.5 MHz, X1: 350 kHz
Type FBTYPE EXTPOS GEARMODE
AquadB 5V with Hall 18 - -
76 S300 Instructions Manual
Electrical installation 09/2011 Kollmorgen
S300