Technical data

8.13.3 Sine Encoder with BiSS digital (X1)
Wiring of a single-turn or multi-turn digital encoder with BISS interface as a feedback sys
-
tem (primary and secondary, ð p.62). The thermal control in the motor is connected via
the encoder cable to X1 and evaluated there.
If cable lengths of more than 50m are planned, please consult our customer service.
Frequency limit: 1,5 MHz
Type FBTYPE EXTPOS GEARMODE Up
5V digital (BiSS B) 20 11 11 5V +/-5%
12V digital (BiSS B) 22 11 11 7,5...11V
5V digital (BiSS C) 33 12 12 5V +/-5%
The pin assignment shown on the encoder side relates to the Kollmorgen motors.
S300 Instructions Manual 65
Kollmorgen 09/2011 Electrical installation
S300
SubD 15
round, 17-pin