Technical data

8.13.2 Sine Encoder with BiSS analog (X1)
Wiring of a single-turn or multi-turn sine-cosine encoder with BISS interface as a feed
-
back system (primary and secondary, ð p.62). The thermal control in the motor is con
-
nected via the encoder cable to X1 and evaluated there.
If cable lengths of more than 50m are planned, please consult our customer service.
Frequency limit (sin, cos): 350 kHz
Type FBTYPE EXTPOS GEARMODE Up
5V analog (BiSS B) 23 - - 5V +/-5%
12V analog (BiSS B) 24 - - 7,5...11V
The pin assignment shown on the encoder side relates to the Kollmorgen motors.
64 S300 Instructions Manual
Electrical installation 09/2011 Kollmorgen
S300
SubD 15
round, 17-pin