Technical data

6.9.5 Technical data and pinning
Input voltage
20 V..30 V
Input current
33 mA – 40 mA (Ieff)
Peak current
100 mA (Is)
6.9.6 Enlosure
Since the servo amplifier meets enclosure IP20, you must select the environment ensu-
ring a safe operation of the servo amplifier. The enclosure must meet IP54 at least.
6.9.7 Wiring
When using STO wiring leads outside the control cabinet, the cables must be laid durably
(firmly), protected from outside damage (e.g. laying in a cable duct), in different sheathed
cables or protected individually by grounding connection.
Wiring remaining within the demanded enclosure must meet the requirements of the stan-
dard IEC 60204-1.
S300 Instructions Manual 37
Kollmorgen 09/2011 Technical description