Technical data

5 Package
5.1 Package supplied
When an amplifier from the S300 series is ordered (order numbers ðp.129), the following
is supplied:
— S3xx
— Mating connectors X0, X3, X4, X8
— Mating connector X9 only with SERVOSTAR 303-310 (S3xx6)
— Instructions Manual
— Online documentation on CD-ROM
— Setup software DRIVEGUI.EXE on CD-ROM
The mating SubD connectors are not part of the package!
Accessories :
(must be ordered separately, if required; description see accessories
manual)
— motor cable (prefabricated) with special shield clamp, or both power connectors
separately, with the motor cable as a cut-off length
— feedback cable (prefabricated)
or both feedback connectors separately, with the feedback cable as a cut-off length
— motor choke 3YL, for motor cables longer than 25 meters
— external brake resistor BAR(U)
— communication cable to the PC (ð p.90) for setting parameters from a PC
— power cable, control cables, fieldbus cables (as cut-off lengths)
5.2 Nameplate
The nameplate depicted below is attached to the side of the servo amplifier.
The information described below is printed in the individual fields.
S300 Instructions Manual 19
Kollmorgen 09/2011 Package
CommentsSerial number
Servo amplifier type
max. ambient
temperature
Output current
in S1 operation
Hardware
Revision
Enclosure Rating
Electrical supply
Installed load