Technical data

9.3.4.2 Units/Mechanical

The user units for all in-

put fields in the setup

software can be prese-

lected here.

Position, Velocity, Acceleration

Select usable units for your application referring to the moved load.

Mechanical Conversion

The relationship between motor shaft revolution (pole pait pitch with linear motors) and

motion distance of the load is specified here. Gear ratio can be calculated here as well.

Detailed information can be found in the online help

Use the tool based on sample applications for calculating the resolution value:

Calculate PGEARI/PGEARO for..." button

If your application does not corre-

spond to any of the listed examples,

enter the required parameters direct-

ly in the fields on the “Units” screen.

First, select the application that corresponds to your own. Next, set the position unit.

Select the position unit that provides you with the required accuracy for your application.

Set the mechanical data for you application now. If a gearhead is flange-mounted on the

motor, you must also enter the gearhead data (either the number of teeth or the ratio of

the revolutions).

Then click the “Calculate conversion factors and return” button.

Click NEXT.

S300 Instructions Manual 101

Kollmorgen 09/2011 Setup