Product manual

Integrated safety

Appropriate insulation/creepage distances and electrical isolation ensure safe electri

cal separation, as per EN 50178, between the power input / motor connections and

the signal electronics.

Soft-start, overvoltage detection, short-circuit protection, phase-failure monitoring.

Temperature monitoring of the servo amplifier and motor (if our motors and prefabri

cated cables are used).

Auxiliary supply voltage 24V DC

Electrically isolated, internal fusing, from an external 24V DC power supply unit with,

for instance, isolating transformer or uninterruptible power supply.

Operation and parameter setting

With our user-friendly setup software, for setup via the serial interface of a PC.

If no PC is available: direct operation by two keys on the servo amplifier and a 3-cha

racter LED display.

Fully programmable via RS232 interface.

Completely digital control

Digital current controller (space vector, pulse-width modulation, 62.5 µs)

Adjustable digital speed controller (62.5 µs)

Integrated position controller, with adaptation possibilities for all applications (250 µs)

Integrated step/direction interface for connecting a servomotor to a stepper controller

Evaluation of resolver signals and sine-cosine signals of high-resolution encoders

Encoder emulation (incremental, compatible with A quad B or SSI)

Comfort functions

2 programmable analog inputs

4 programmable digital inputs

2 programmable digital outputs

programmable logical combinations of digital signals

Expansions

I/O-14/08 expansion card, ð p.86

PROFIBUS DP expansion card, ð p.89

SERCOS expansion card, ð p.90

DeviceNet expansion card, ð p.92

EtherCat expansion card, ð p. 95

SynqNet expansion card, ð p. 96

-2CAN- expansion module, separated connectors for CAN-bus and RS232, ð p.98

For third-party expansion cards (ModBus, LightBus, FIP-IO etc.) please contact the

manufacturer for further information

16 SERVOSTAR

300 Product Manual

Technical description 09/2006 Kollmorgen