User's Manual

600 W Broadway Ave., Suite 250
San Diego, CA 92101
Tel: [phone]
Fax: [phone]
Awarepoint Corporation Confidential and Proprietary
Installation
Pre-Installation
Prior to installing the tag, the Awarepoint server, bridges, and sensors must be
correctly installed. In an area that is covered, switch the slider on the tag. This will initialize it
to the facility. Next, in the System Manager check that the tag is in the system by viewing the
list of tags on the Devices: Tags page.
Attaching the tag to an asset
To attach a tag to an asset, you will need to know the asset’s type, and optionally
manufacturer, model, and serial number.
1. You can use zip ties or double sided tape to attach the tag to the asset. For zip tie
attachment, use the two mounting holes.
2. In the system manager, create a new asset type if one does not exist already.
3. In the system manager, create a new asset with the specified manufacturer, model,
and unique ID.
4. Drag the tag’s MAC address onto the newly created asset.
5. Click Apply