User's Manual
Table Of Contents
- 1 Introduction
- 2 Installation Steps
- 3 Step #1 – Configure Regions
- 4 Step #2 – Preparing for Installation
- 5 Step #3 – Installing the Appliance
- 6 Step #4 – Installing the Bridge
- 7 Step #5 – Installing the Sensors
- 8 Step #6 – Installing the Tags
- 9 Step #7 – Associating the Tags with Assets
- 10 Step #8 – System Testing and Quality Control
- 11 Adding Additional Assets After Installation
- 12 Troubleshooting
Adding Additional Assets After Installation 65
Installation Guide v2.3 – 5/10
Confidential and Proprietary ©2010, Awarepoint Corporation
2. Choose the New Asset button.
Figure 88 - Asset Properties
3. Choose the Associate button to display a list of Tags.
Figure 89 - List of Tags
4. Choose the correct Tag to associate with this asset.
5. Fill in the rest of the asset information and choose the Apply button.
The new asset will now be listed under the appropriate asset type.