User's Manual
Table Of Contents
- 1 Introduction
- 2 Installation Steps
- 3 Step #1 – Configure Regions
- 4 Step #2 – Preparing for Installation
- 5 Step #3 – Installing the Appliance
- 6 Step #4 – Installing the Bridge
- 7 Step #5 – Installing the Sensors
- 8 Step #6 – Installing the Tags
- 9 Step #7 – Associating the Tags with Assets
- 10 Step #8 – System Testing and Quality Control
- 11 Adding Additional Assets After Installation
- 12 Troubleshooting
Step #7 – Associating the Tags with Assets 53
Installation Guide v2.3 – 5/10
Confidential and Proprietary ©2010, Awarepoint Corporation
Figure 76 - Infopoint Main Page
9.2 Adding Assets
In the Infopoint interface, choose the Assets tab.
Figure 77 - Assets Tab
When new assets are purchased or rented, they need to be added to the system.
Changes in assets, asset types, manufacturers, models or owners, also need to be
edited in the system.
Figure 78 - Manage Assets
1. Choose Create an Asset from the left column.