User's Manual
Table Of Contents
- 1 Introduction
- 2 Installation Steps
- 3 Step #1 – Configure Regions
- 4 Step #2 – Preparing for Installation
- 5 Step #3 – Installing the Appliance
- 6 Step #4 – Installing the Bridge
- 7 Step #5 – Installing the Sensors
- 8 Step #6 – Installing the Tags
- 9 Step #7 – Associating the Tags with Assets
- 10 Step #8 – System Testing and Quality Control
- 11 Adding Additional Assets After Installation
- 12 Troubleshooting
Step #3 – Installing the Appliance 25
Installation Guide v2.3 – 5/10
Confidential and Proprietary ©2010, Awarepoint Corporation
5.8 Configure the DNS
1. From the main menu, select option 3 “configure dns”
2. Change the “local domain name.”
3. Change the “nameservers.”
4. Don’t change the “domain search order”
5. Don’t change the hostname
local domain name:
-------------
nameserver list:
10.0.1.5
-------------
domain search order:
awarepoint.com
-------------
1) change domain name
2) change nameservers
3) change domain search order
q) quit
6. Enter Information
7. Press “q” to return to the main menu
5.9 Test Configuration
Choose option 4, “test network,” to test the network settings.
This will attempt to connect to https://aps.awarepoint.com. If the test is successful then
there will be no output
.