User's Manual
Table Of Contents
- 1 Introduction
- 2 Installation Steps
- 3 Step #1 – Configure Regions
- 4 Step #2 – Preparing for Installation
- 5 Step #3 – Installing the Appliance
- 6 Step #4 – Installing the Bridge
- 7 Step #5 – Installing the Sensors
- 8 Step #6 – Installing the Tags
- 9 Step #7 – Associating the Tags with Assets
- 10 Step #8 – System Testing and Quality Control
- 11 Adding Additional Assets After Installation
- 12 Troubleshooting
ii
Installation Guide v2.3 – 5/10
Confidential and Proprietary ©2010, Awarepoint Corporation
Copyright
Copyright 2010 Awarepoint Corporation, 600 W Broadway, Suite 250, San Diego, CA 92101
All rights reserved. This product or document is protected by copyright and distributed under licenses
restricting its use, copying, distribution, and decompilation. No part of this product or document may be
reproduced in any form by any means without prior written authorization of Awarepoint and its licensors,
if any.
Awarepoint, the Awarepoint logo, and Real-Tme Awareness Solution, are trademarks or registered
trademarks of Awarepoint Corporation in the United States and in other countries.
Microsoft is a registered trademark of Microsoft Corporation in the United States and/or other countries.
ZigBee is a trademark for the ZigBee Alliance.