User's Manual
Table Of Contents
- 1 Introduction
- 2 Installation Steps
- 3 Step #1 – Configure Regions
- 4 Step #2 – Preparing for Installation
- 5 Step #3 – Installing the Appliance
- 6 Step #4 – Installing the Bridge
- 7 Step #5 – Installing the Sensors
- 8 Step #6 – Installing the Tags
- 9 Step #7 – Associating the Tags with Assets
- 10 Step #8 – System Testing and Quality Control
- 11 Adding Additional Assets After Installation
- 12 Troubleshooting
Step #1 – Configure Regions 9
Installation Guide v2.3 – 5/10
Confidential and Proprietary ©2010, Awarepoint Corporation
3.2.3 Creating a Floor
Choose the New Floor button. Enter the name of the Floor (in this example “5”) and
choose OK.
Figure 10 - New Floor Dialog Box
Choose the Usage type from the drop-down list. Some typical usage types include
Psych Floor or Intensive Care.
Enter a floor index. The floor index indicates the order the floors will appear in System
Manager and Status Server. Without a floor index defined, the floors will be sorted
alphabetically by the floor name.
Select the floor you created.
Figure 11 - Floor Created
3.2.4 Importing an Image for a Floor
Choose the Upload Image button and navigate to the digital map of this floor.
The best way to ensure that the map can be easily located is to save the desired map
to the desktop on the computer being used; then, when searching for the map, simply
click desktop and the map can be accessed.