User's Manual
Table Of Contents
- 1 Introduction
- 2 Installation Steps
- 3 Step #1 – Configure Regions
- 4 Step #2 – Preparing for Installation
- 5 Step #3 – Installing the Appliance
- 6 Step #4 – Installing the Bridge
- 7 Step #5 – Installing the Sensors
- 8 Step #6 – Installing the Tags
- 9 Step #7 – Associating the Tags with Assets
- 10 Step #8 – System Testing and Quality Control
- 11 Adding Additional Assets After Installation
- 12 Troubleshooting
Step #1 – Configure Regions 6
Installation Guide v2.3 – 5/10
Confidential and Proprietary ©2010, Awarepoint Corporation
3.1.1 System Manager Home
After you login, you should see the System Manager home screen:
Figure 4 - System Manager home
3.2 Configuring Regions
Under the Positioning tab, choose the Reigions tab to configure Regions. The
Awarepoint System Manager uses a Campus/Building/Floor/Region/Room hierarchy.
The first three levels of the hierarchy are required; the last two are optional.
Note: The screenshots show other campuses in the system for demonstration
purposes only. Your system should not have any other campuses defined.