User's Manual

94
System Manager User Guide |
System Manager 2.0
3. As needed, edit the Name and Duration of the test.
4. Click the Region link and select a different floor or room, if necessary.
5. Click the PIDS link and select or deselect Tags, as necessary.
6. After making all changes necessary, click Save to update the Room Test.
NOTE: Updating a Room Test does not erase the test’s historical runs. The data
from previous test runs, if applicable, will display along with any new data.
7.3.3 Cloning a Room Test
Cloning a test is done to create a test substantially similar to one already in existence
but without deleting one or creating a new one from scratch. This is especially useful
for retaining historical test run data but also for tests that may be run on the same floor
with the same parameters.
1. From the Room Tests window, select the test you want to clone then click the
Clone button in the lower right corner.
The Update Room Test window displays.
2. Enter a new name for the cloned test.
3. If necessary, enter a new duration.
4. Click the Regions link and select a new floor or room, if necessary.