User's Manual

System Manager User Guide |

System Manager 2.0

g. The last step in the process is to put all the pieces together in order to have

each device have a full configuration.

17. Be sure that the AUTO SCAN and AUTO CONFIG sliders are set to the on

position.

18. After the MAC address of the beacon shows up in the discovered AWP devices

list, click the MAC address.

19. When the Start WiFi Provisioning button displays, press it.

20. Once the beacon is provisioned successfully, the PID of the beacon shows in the

Provisioned Devices list.

During the provisioning process you can monitor the awarepoint.log file on the

appliance using the following command:

tail -F /var/log/tomcat/awarepoint.log| grep -i

mapHierarchyString'

When the device is configured you should be able to see a configuration

message similar to the following sent back to the device:

2016-10-12 11:06:25,752 [BleWifiActorSystem-akka.actor.default-

dispatcher-13] DEBUG

com.awarepoint.blewifiserver.infrastructure.actors.ble.ConfigurationHa

ndler - sendConfigurationResponse EncodeResponse{mac=89842000652,

hexMac='14EB00230C', message=Message{header=BleHeader{version=4,

messageType=CONFIGURATION, mac=89842000652, hexMac='14EB00230C',

ackRequested=true},

body=Configuration{nvpList=[Nvp{oid=WIFI_BEACON_REPORT_OFF_SAMPLE_INTE

RVAL_ZONE_6, dataString=0},