User's Manual

Vaccines for Children |

Installation and Setup Guide

4.3.5.2 Tag Connected Through Awarepoint Appliance

Perform the following procedure to configure the tag for use in the Awarepoint solution

with awareHealth:

1. Pair the VFC tag with its display.

See the procedure in Pairing Devices.

2. Batch create the tag.

a. From the Devices tab drop-down, select Create.

b. From the Device Type drop-down, select the type of device you are creating.

c. In the MAC Addresses or Product ID's (PID): field, enter the MAC address

or product ID (PID) of the device or devices.

d. Click Create.

3. Configure the tag to be a VFC tag.

a. From the devices list on the left, drill down to find the Tag type whose

configuration you want to change or update, then select the configuration

beneath it.

b. Edit each desired field or checkbox to the configuration settings desired.

NOTE: Refer to the System Manager User Guide for detailed information on all

fields and a full description of the configuration process.

c. Click Submit to apply any changes made.

Following this procedure, the tag will display in awareHealth and an alert can be set to

notify personnel when the temperature asset goes out of range.

4.3.6 VFC Display Setup

The VFC Display functions as a separate device on the network and requires its own

setup and procedures apart from the Environmental Tag. The setup consists of the

following:

• Batch Creating and Pairing

• Battery Installation and Powering On

• Provisioning