User's Manual

22
Vaccines for Children |
Installation and Setup Guide
The temperature probe comes pre-assembled. No preparation is necessary for
installation.
4.3.3.2 Glycol-based Temperature Vial Setup
Before beginning this procedure, be sure you have the following necessary equipment:
• 40 mL glass vial
• Probe Cable Assembly
• Leather Punch
• Propylene Glycol: 1.3 fluid ounces
1. Fill the glass vial with 1.3 fluid ounces of glycol (approximately 39 mL).
2. Using the leather punch, make a hole in the silicone material in the middle of the
cap assembly.