User's Manual

Page 7 of 10
4. Charging Scout
Use a standard USB charger for charging
(not included)
• Before using your scout, you should
charge the battery for 5 hours for the
optimal battery capacity.
• Use the original micro USB charging
cable to avoid any damage.
• Normally a full charge takes 3 hours
Plug the Micro USB cable in the Micro
USB port:
The LED on your scout will start blinking
red when it reaches a 20% charge level.
You also can search the charge level of
your scout in your wiiink app.
While charging, the LED will blink green.
When charging is completed, the LED will
show a continuous green light (only as
long as plugged into a charging device)
5. Using your Scout
In order to use your scout device, refer to
the app manual and help system
6. Technical Data
• Up to 24 hours scout searching
with fully charged battery.
• Up to 36 hours standby time
• Normal charging time 2 hours
• Rechargeable lithium polymer bat-
tery (380 mAh)
• Bluetooth 5
• Operating range: up to 10 meters
(33 feet)
Note
• Specifications are subject to
change without notice.