User`s manual

VIA 693/693A AT MAINBOARD AWARD BIOS SETUP
4-11
4.7 POWER MANAGEMENT SETUP
ROM PCI / ISA BIOS (2A6LGP8B)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
ACPI function : Disabled Primary INTR : ON
Power Management : User Define IRQ3 ( COM 2) : Primary
PM Control by APM : Yes IRQ4 ( COM 1) : Primary
Video Off After : Standby IRQ5 ( LPT 2) : Primary
Video Off Method : Blank Screen IRQ6 ( Floppy Disk) : Primary
MODEM Use IRQ : 3 IRQ7 ( LPT 1) : Disabled
Soft-Off by PWR-BTTN : Instant-Off. IRQ9 ( IRQ2 Redir) : Secondary
HDD Power Down : Disable IRQ10 ( Reserved) : Secondary
Doze Mode : Disable IRQ11 ( Reserved) : Secondary
Suspend Mode : Disable IRQ12 ( PS/2 Mouse) : Primary
** PM Events ** IRQ13 ( Coprocessor) : Primary
VGA : OFF IRQ14 ( Hard Disk) : Primary
LPT & COM : LPT / COM IRQ15 ( Reserved) : Disabled
HDD & FDD : ON ESC : Quit  : Select Item
DMA / master : OFF F1 : Help PU/PD/+/- : Modify
Modem or LAN resume : Disabled F5 : Old Values (Shift)F2 : Color
RTC Alarm Resume : Disabled F7 : Load Setup Defaults
Fig. 4-6 POWER MANAGEMENT SETUP screen.
ACPI function : (default setting: disabled)
This item allows you to enable/disable the Advanced Configuration and Power
Management (ACPI).
The choice: Enabled, Disabled.
Power Management : (Default setting: “User Define”)
This category allows you to select the type (or degree) of power saving and is directly
related to the following modes:
1. Doze Mode
2. Standby Mode
3. Suspend Mode
4. HDD Power Down