User`s manual

VIA 693/693A AT MAINBOARD HARDWARE SETUP

3-10

(P) Push buttons and LED connectors

A series of connectors are designed on the board to connect the push buttons and

LED indicators. Followings are the details:

BAT 1

DIMM 3

DIMM 2

DIMM 1

FDCIDE 1

IDE 2

RS: Reset Button connector

HL: HDD LED connector

TL: Turbo LED

SL: Sleep LED connector

PW: Power On / Off Suspend switch

1. RS Reset Button Connector

Pin # Signal name

Pin1&2 Function

1 Reset Control Open No action

2 Ground Short System Reset

2. HL IDE HDD LED Connector

Pin # Signal name

1 + 5V DC Pull-up

2 HDD Active Signal

3. TL TURBO LED Connector

Pin # Signal name

1 + 5V DC Pull-up

2 Ground

4. SL Sleep LED Connector (valid only with ATX power supply)

This LED will be lightened when the AC power is connected and the

system is power off, darkened when the AC power is disconnected or the

system is powered on.

Pin # Signal name

1 Signal Pin

2 Ground