User`s manual

BIOS SETUP
MI945X User’s Manual 33
VGA Setting
The fields and the default setting for the VGA Setting are as follows:
PEG/Onchip VGA Control Auto
PEG Force X1 Disabled
On-Chip Frame Buffer Size 64MB
DVMT Mode Enable
Total GFX Memory 128MB
PAVP Mode PAVP-Lite
PEG/Onchip VGA Control
The options are Onchip VGA, PEG Port and Auto.
PEG Force X1
The options are Enabled and Disabled.
On-Chip Frame Buffer Size
The options are 32MB, 64MB and 128MB.
DVMT Mode
The options are Enabled and Disabled.
Total GFX Memory
The options are 128MB, 256MB and Max.
PAVP Mode
The options are Disabled, PAVP-Lite and PAVP-High.
VGA Boot Device Setting
The fields and the default setting for this section are as follows:
Boot Display CRT + LVDS
SDVO Device Setting None
SDVO LVDS Protocol 1 Ch SPGW,24bit
SDVO Panel Number 1024x768
Active LVDS Device No LVDS
Integrated LVDS Protocol 18bit
Panel Scaling AUTO
Panel Type 1024x768 SC/DC
Boot Display
The options are CRT, LVDS, CRT + LVDS, DVI and CRT + DVI.
SDVO Device Setting
The options are None, LVDS, DVI and CRT.