User`s manual

BIOS SETUP
28 MI945AF User’s Manual
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Security Chipset Exit
IDE Configuration
Options:
Disabled
Compatible
Enhanced
<- Select Screen
↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Mirrored IDER Configuration [Enabled]
SATA#1 Configuration [Compatible]
Configure SATA#1 as [IDE]
SATA#2 Configuration
► Primary IDE Master : [Not Detected]
► Primary Slave Master : [Not Detected]
► Secondary IDE Master : [Hitachi HDS72]
► Secondary IDE Slave : [Not Detected]
► Third IDE Master : [Not Detected]
► Fourth IDE Master : [Not Detected]
► Primary IDE Master : [Not Detected]
► Fifth IDE Master : [Not Detected]
► Fifth IDE Slave
IDE Detect Time Out (Sec)
ATA(PI) 80Pin Cable Detection
: [Not Detected]
[35]
[Host & Device]
The IDE Configuration menu is used to change and/or set the
configuration of the IDE devices installed in the system. SATA#1 can be
configured as IDE, Raid or AHCI.
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Security Chipset Exit
Hardware Health Configuration
Configure CPU.
<- Select Screen
↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
System Temperature :45°C/113°F
CPU Temperature :45°C/113°F
Chassi Temperature :33°C/102°F
SYSTEM Speed :0 RPM
CPUFAN Speed :5400 RPM
Vcore(V) :1.160 V
AVCC :3.392 V
3VCC
12V
:3.392 V
:12.196 V
1.8V :1.856 V
5V : 5.273V
VSB : 3.392V
VBAT (V) :3.21 V
ACPI Shut down Temperature 95°C/203°F
The Hardware Health Configuration menu is used to show the operating
temperature, fan speeds and system voltages.