User`s manual

INSTALLATIONS
J6: Wake On LAN Connector
J6 is a 3-pin header for the Wake On LAN function.
Pin # Signal Name
1 +5VSB
2 Ground
3 -PME
J7: Power LED Connector
Pin # Signal Name
1 Vcc
2 NC
3 PLED
J8: System Function Connector
Signal Name Pin Pin Signal Name
5VDUAL 1 2 PS_ON
5V 3 4 HDD Active
Ground 5 7 Reset
ATX power on switch: Pins 1-2
HDD LED: Pins 3-4
Reset switch: Pins 5-6
J9, J10: LVDS Connectors (1st channel, 2nd channel)
The LVDS connectors on board consist of the first channel and second
channel and supports 18-bit or 24-bit.
Signal Name Pin # Pin # Signal Name
TX0- 2 1 TX0+
Ground 4 3 Ground
TX1- 6 5 TX1+
5V/3.3V 8 7 Ground
TX3- 10 9 TX3+
TX2- 12 11 TX2+
Ground 14 13 Ground
TXC- 16 15 TXC+
5V/3.3V 18 17 ENABKL
+12V 20 19 +12V
MI800 User’s Manual 19