User`s manual

INSTALLATIONS
JP7: ME (Management Engine) – Disabled / pin closed
The factory default setting of the 2-pin JP7 jumper is closed. This means
the management engine function is disabled.
JP8: Clear CMOS Contents
Use JP8, a 3-pin header, to clear the CMOS contents. Note that the
ATX-power connector should be disconnected from the motherboard
before clearing CMOS.
JP8 Setting Function
Pin 1-2
Short/Closed
Normal
Pin 2-3
Short/Closed
Clear CMOS
JP9: Compact Flash Socket Master/Slave Setting
JP9 Compact Flash
Master
Slave
JP10: COM2 RS232 +5V/+12V Power Setting
JP10 Setting Function
Pin 1-2
Short/Closed
+12V
Pin 3-4
Short/Closed
Normal
Pin 5-6
Short/Closed
+5V
12 MB945 User’s Manual