User`s manual

based on a worse-case (cheapest with minimum feature) micro-ATX chassis (thus we need

not specify minimum airflow requirement for system fan). Additional inputs on chassis

requirements are in next section. The thermal analysis is based on a worse-case configuration

chassis with no side /front venting and one rear fan. This configuration should be sufficient to

cover the envelope of available micro-ATX chassis in the market.

Additional chassis features, such as ACG1.1 (or side-venting), front-fan and front -venting,

can be included for better system thermal. These are recommended but not mandatory.

4-14 Optional PCI Express Card Installation Guide

1. Loose two screws in the two rivets. 2.Ready to fasten the screws after installed

Mini-PCI Express x1 compatible card.

3. Plug in the Mini-PCI Express Interface Card at the

angle of 45-degree.

4.Press down the Card and make sure fasten

the screw well.