User`s manual

40
4-13 The motherboard Installation of Standard Chassis
Before you install the motherboard into the chassis, you should install the CPU and its active
thermo kit and Mini-PCI Express Card first if it’s necessary. And prepare with the screws and
space-support holders (P/N: G09-FIX9F2-F).
1. Choose the adequate chassis. 2. Set the F04-137-F I/O shield to the side of
the chassis.
3. Put the space-support holders on the four pillars. 4.Make sure to fasten the screws through the
motherboard to the pillars.
**The space-support holder is only for standard chassis; please do not use it to double-side
components mounted compatible chassis. Or it may cause interference of some components of
this motherboard.
***The board ( 17 cm x 17 cm) is designed to be compatible with genetic micro-ATX chassis
or a SFF chassis. This motherboard will ship with optional active thermo kit and IGP chipset
thermal solutions assembled.
The minimum thermal requirement for genetic Micro-ATX chassis is to ensure adequate
motherboard/component-level cooling by equipping the chassis with at least a real fan
exhausting airflow out of chassis.
The optional active thermo kit and IGP chipset thermal solutions were designed and validated